SECO LARM USA Door SK 1323 SDQ User Guide

Outdoor Stand-Alone  
Weatherproof Keypads  
Quick User Programming Guide  
(SK-2323-SDQ shown)  
(SK-1323-SPQ shown)  
Model  
Number  
2 Relay  
Outputs  
Backlit  
Keys  
Proximity  
Reader  
Mullion-Style Keypads  
SK-2323-SDQ  
SK-2323-SPQ  
Sealed-Environment Keypads  
SK-1323-SDQ  
SK-1323-SPQ  
For complete programming instructions, please see page 10 of the User Manual.  
NOTE: Products with a model number that ends with “Q” or have a round green “Q” sticker represent RoHs compliant products.  
 
ENFORCER Outdoor Stand-Alone Keypad Quick Programming Guide  
Programming Output #1  
Each Output #1 user can be programmed to have a user code and a user card.*  
1.1 User Code Only  
1. Enter Programming Mode by entering the Master Code twice.  
0
0
0
9
9
9
(
to  
)
2. Enter a user ID number.  
3. If the left LED is red, previous user data exists. Clear it by entering  
The keypad will beep in confirmation and the left LED will turn green.  
4. Enter a new 5-digit user code.  
.
5. To program the next user, repeat from step 2 in section 1.1, 1.2, or 1.3.  
6. Exit Programming Mode by pressing  
.
1.2 User Card Only*  
1. Enter Programming Mode by entering the Master Code twice.  
0
0
0
9
9
9
(
to  
)
2. Enter a user ID number.  
3. If the left LED is red, previous user data exists. Clear it by entering  
The keypad will beep in confirmation and the left LED will turn green.  
4. Swipe a new user card.  
.
5. Return to Programming Mode by pressing  
.
6. To program the next user, repeat from step 2 in section 1.1, 1.2, or 1.3.  
7. Exit Programming Mode by pressing  
again.  
1.3 User Card and Code*  
1. Enter Programming Mode by entering the Master Code twice.  
0
0
0
9
9
9
(
to  
)
2. Enter a user ID number.  
3. If the left LED is red, previous user data exists. Clear it by entering  
The keypad will beep in confirmation and the left LED will turn green.  
4. Swipe a new user card.  
.
5. Enter a new 5-digit user code.  
6. To program the next user, repeat from step 2 in section 1.1, 1.2, or 1.3.  
7. Exit Programming Mode by pressing  
.
*SK-2323-SPQ and SK-1323-SPQ only.  
SECO-LARM U.S.A., Inc  
3
 
ENFORCER Outdoor Stand-Alone Keypads Quick Programming Guide  
Programming Output #2  
Each Output #2 user may only have a user code OR a user card programmed.  
2.1 Programming an Output #2 User Code  
1. Enter Programming Mode by entering the Master Code twice.  
4
2. Enter  
.
( 0 0 to  
)
0
9
3. Enter a user ID number.  
4. If the left LED is red, previous user data exists. Clear it by entering  
The keypad will beep in confirmation and the left LED will turn green.  
5. Enter a new 5-digit user code.  
.
6. To program the next user, repeat from step 3 in section 2.1 or 2.2.  
7. Return to Programming Mode by pressing  
.
8. Exit Programming Mode by pressing again .  
2.2 Programming an Output #2 User Card*  
1. Enter Programming Mode by entering the Master Code twice.  
4
2. Enter  
.
0
0
(
to  
0
9 )  
3. Enter a user ID number.  
4. If the left LED is red, previous user data exists. Clear it by entering  
The keypad will beep in confirmation and the left LED will turn green.  
5. Swipe a new user card.  
.
6. To program the next user, repeat from step 3 in section 2.1 or 2.2.  
7. Return to Programming Mode by pressing  
.
8. Exit Programming Mode by pressing  
again.  
*SK-2323-SPQ and SK-1323-SPQ only.  
NOTICE: The information and specifications printed in this manual are current at the time of publication. However, the SECO-LARM policy  
is one of continual development and improvement. For this reason, SECO-LARM reserves the right to change specifications without notice.  
SECO-LARM is also not responsible for misprints or typographical errors.  
Copyright © 2010 SECO-LARM U.S A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or in part, without  
the written permission of SECO-LARM.  
SECO-LARM® U.S.A., Inc.  
PICCN2  
16842 Millikan Avenue, Irvine, CA 92606  
SK-x323-SxQ Addendum_1008.docx  
Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326  
4
SECO-LARM U.S.A., Inc.  
 

Quantum Data Portable Generator 802R PCI User Guide
RCA Camcorder Pro884HB User Guide
RCA Flat Panel Television HD50LPW163 User Guide
Roland Electronic Keyboard VIMA RK 100 User Guide
Roland Projection Television CR 8000 User Guide
Roland Universal Remote GR 33 User Guide
Samsung Digital Camera EC ST66ZZBPRUS User Guide
Samsung Telephone ITP 5107SIP User Guide
Sears Automobile Accessories 48624536 User Guide
SECO LARM USA Door E 941SA 1K2PQ User Guide