Salton Kitchen Utensil RHFS1 User Guide

®
S A  
L A N C E I N T É G R É E  
N E À T R A N C H E R D E L U X E  
DELUXE FOOD SLICER WITH  
PORTION SCALE  
Model RHFS1  
OWNER’S MANUAL  
 
2
 
Additional Important Safeguards  
1. All users of this appliance must read and understand this Owner's  
Manual before operating or cleaning this appliance.  
2. The cord to this appliance should be plugged into a 120V AC electri-  
cal outlet only.  
3. Do not leave this appliance unattended during use.  
4. If this appliance begins to malfunction during use, immediately release  
the “Pulse” Switch, turn the unit OFF and unplug the cord. Do not  
use or attempt to repair the malfunctioning appliance.  
5. If this appliance falls or accidentally becomes immersed in water,  
unplug it immediately. Do not reach into the water! Do not use this  
appliance after it has fallen into or becomes immersed in water.  
6. To reduce the risk of injury to persons or property, never use this  
appliance in an unstable position.  
7. Do not use this appliance for other than its intended use.  
8. The safety switch prevents accidental operation of the Food Slicer by  
pressing the switch plate. Do not attempt to defeat this safety feature.  
9. Unplug the appliance from wall outlet when not in use, before putting  
on or taking off parts and before cleaning. Be careful, the blade con-  
tinues to turn for a while even after the appliance has been switched  
off.  
10. Do not operate the appliance continuously for more than 10 minutes.  
Allow the appliance to cool down for one hour before second opera-  
tion.  
11. Do not use appliance to cut deep frozen food, bones or jellylike wet  
food.  
12. Operate the appliance only when the Blade-Locking Knob is properly  
engaged and tightened.  
13. Handle the Blade carefully when cleaning, removing and inserting, as  
the Blade is extremely sharp. Do not touch the sharp edge of the  
Blade. Do not use or install the Blade in any way other than recom-  
mended in this manual.  
14. Do not touch sharp surfaces. To avoid danger of injury, always cut  
food with Feeder and Food Press in place. The Food Press should  
always be used, unless the size and shape of the food prohibits its  
use. The Protective Rail requires the Feeder to be used in all slicing  
situations. Do not attempt to defeat this safety feature.  
4
 
Additional Important  
Safeguards (Cont.)  
15. Always set the Adjustment Plate to minimum thickness position and  
lock the Feeder after each use, before and after cleaning.  
l e m e n t .  
b l e , c a r u n e n f a n t p o u r r a i t l e t i r  
16. Operate this appliance on a flat, level surface only.  
a s l e c o r  
17. Do not incinerate the appliance even if it is severely damaged. The  
à c e l l e d e l ' a p p a r  
batteries can explode in a fire.  
i s s a n c e d u c o r  
18. It is normal that excessive heat from continuous usage may darken  
the LCD display temporarily.  
e :  
n d ' u t i l i s e r c e l u i - c i a v e c p r é c a u t i o n s e t d e r  
19. Do not overload the scale as shown ("O-LD") on the Electronic Scale  
Overload Readout (#24). Maximum weight is 2000g/70.40 oz  
(4 lb. 6 1/2 oz). Prolonged overloading will damage the electronic  
s p a r i r  
t é r d u i r  
( o u l e c o r  
scale permanently.  
Polarized Plug  
u c n e é d l i e s c p t o r i s c i i t e i f n d p e r  
This appliance has a polarized plug (one blade is wider than the other). To  
t ’ a i m u t p r o s s i b l e , f a i t e s  
reduce the risk of electrical shock, this plug is intended to fit into a polar-  
e q u e d a n s u n s e u l s e n s . S i l a p r i s e n e r  
ized outlet only one way. If the plug does not fit fully in the outlet, reverse  
the plug. If it still does not fit, contact a qualified electrician. Do not  
e s e s t p l u s l a r g e q u e l ’ a u t r  
attempt to modify the plug in any way.  
a u p r p a r  
Short Cord Instructions  
A short power-supply cord (or detachable power-supply cord) is provided  
g e s p e r m a n e n t s à l a b a l a n c e .  
to reduce the risk resulting from becoming entangled in or tripping over a  
t 2 0 0 0 g ( 7 0 , 5 o z ) . U n e s u r  
longer cord.  
Longer detachable power-supply cords or extension cords are available  
b a l a n c e ( I n d i c a t i o n «  
and may be used if care is exercised in their use.  
m p o r a i r  
If a longer detachable power-supply cord or extension cord is used, (1)  
t , l a c h a l e u r d é g a g é e p a r u n e u t i l i s a t i o n c o n t i n u e p e u t  
the marked electrical rating of the cord set or extension cord should be at  
a i r  
é r  
least as great as the electrical rating of the appliance, and (2) the cord  
should be arranged so that it will not drape over the countertop or table-  
h o r i z o n t a l e .  
top where it can be pulled on by children or tripped over unintentionally.  
a r  
e c o u p e a u m i n i m u m e t à v e r r  
e u t i l i s a t i o n , a v a n t e t a p r è s l e n e t t o y a g e , v e i l l e r à r é g l e r  
n s  
5
 
Electric Power  
If the electric circuit is overloaded with other appliances, your appli-  
ance will not operate properly. It should be operated on a separate  
electrical circuit from other appliances.  
Battery Installation  
1. Make sure the Food Slicer is unplugged and the Blade has come  
to a complete stop.  
2. Carefully turn the Food Slicer over and remove the battery cover  
from the base.  
3. Replace with 4 new AA-size alkaline batteries. Make sure the new  
batteries are inserted according to the same polarities of the old  
batteries. Refer to the "+" marks on the appliance for the correct  
polarities.  
4. Replace the battery cover and carefully turn the appliance upright.  
Battery Safety  
CAUTION: There is a danger of battery explosion if proper installation  
and disposal is not followed. Do not incinerate or dispose of batteries  
in a fire. Replace only with same or equivalent type batteries. Replace  
the batteries when the LCD is dim or the electronic scale is not oper-  
ating.  
1. The old batteries should be disposed of according to your local  
codes. Check with your local solid waste officials for details in your  
area for recycling options or proper disposal.  
2. Remove the batteries from the appliance for long-term storage.  
Battery leakage (released electrolytes) can damage your appliance.  
WARNING: Do not mix old and new batteries. Do not mix alkaline,  
standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.  
Introduction  
®
Congratulations on your purchase of the Russell Hobbs RHFS1  
Deluxe Food Slicer with Portion Scale. Not only will this stylish yet  
rugged appliance slice a wide variety of food ranging from Beef to  
Zucchini but the built in scale will indicate what your slices weigh and  
the electronic Control Display will identify the set thickness. Set-up  
time for future use is practically eliminated. Now you can prepare exact  
cuts of prime Rib, wafer thin slices of roast beef, and equal cuts of  
freshly baked bread. Slicing cheese is a breeze and vegetables have  
never been easier with this advanced 'State-of-the-Art' Food Slicer.  
6
 
t d e s e n g r  
s l e p r  
m e n t l a p o i g n é e d e v e r r  
Before Using for the First Time  
CAUTION: Blade is sharp. Handle carefully. Do not wash in dish-  
e 5 . A s s u r  
washer. Do not immerse cord, plug or appliance in water or any  
e n t a p r è s l ’ a v o i r l a v é e . P r  
other liquid. Do not remove the the lubricant on the gears.  
l o n s d e r i n c e r  
a m e a u f o n d d e l ’ e a u p e u t ê t r  
1. Remove any packaging materials  
To remove Feeder, slide away from  
Blade and pull up from here.  
n t . N e l a i s s e z p a s l a l a m e t r  
including any blue protective film.  
e d a n s d e l ’ e a u c h a u d e s a v o n n e u s e . R i n c e z e t s é c h e z  
Install batteries, see "Battery  
a u d e c o m m a n d e s t o u j o u r s s e c s .  
Installation" on previous page.  
s s u r f a c e s . S é c h e z s o i g n e u s e m e n t . M a i n t e n e z l a b a l a n c e  
2. Adjust the Thickness Adjustment  
h i f  
Knob to minimum thickness set-  
ting.  
e l a l a m e .  
o y e z t r è s p r u d e n t e n l a  
3. Always make sure the unit is  
m e n t  
unplugged and the Blade has  
f i c e c e n t r a l p o u r  
come to a complete stop before  
n t , a t t r a p e z l a l a m e d e  
cleaning.  
v e r s l ’ a v a n t .  
4. Remove the Food Press, Feeder,  
o u s s e z c e l l e - c i  
To replace Feeder, put in front track  
first and press back into place.  
(see Figure 1 for disassembly and  
n t d ’ u n e m a i n à l ’ a r r i è r  
assembly) and Food Tray and wash  
e r r  
h o r a i r  
e r r  
in warm, soapy water. Rinse and dry  
thoroughly.  
Figure 1  
d a n s l a f e n t e d e l a  
5. Remove the Blade by inserting a  
coin in the slot of the Blade-locking  
Knob and turning clockwise.  
n t .  
R i n c e z e t s é c h e z  
Remove the Blade-locking Knob.  
v e z - l e s à l ’ e a u c h a u d e  
See Figure 2. With one hand on the  
a i n s i q u e l e p l a t e a u à  
back side of the Blade, gently push  
g e e t l e  
the Blade forward and at the same  
time, grip the hole in the center of  
o y a g e .  
the Blade from the front and lift off.  
n t i m m o b i l i s é e a v a n t d e  
The Blade is very sharp, use  
u e l a l a m e s o i t  
extreme care when handling. DO  
NOT touch sharp edge of Blade.  
a r  
p a i s s e u r m i n i m u m .  
l e t t e d ’ é p a i s s e u r d e  
6. Wipe all surfaces with a damp cloth.  
Figure 2  
Dry thoroughly. Keep the Control  
Panel and electronic scale dry.  
p i l e s  
e z l e s p i l e s . V  
7. Wash the Blade, in warm, soapy water. Rinse and dry thoroughly.  
e l l i c u l e t r a n s p a r  
Do not allow the Blade to soak in water. Trying to locate the Blade  
under water is potentially dangerous.  
d ’ e m b a l l a g e , y  
l u b r i f i a n t s u r l e s e n g r e n a g e s .  
8. We suggest that you wash, rinse, dry and reinstall the Blade imme-  
e c t r i q u e n i l ’ a p p a r e i l d a n s u n l i q u i d e . N e p a s é l i m i n e r l e  
diately. Re-assemble the Blade in reverse order of Step 5. Make  
m e t t r e a u l a v e - v a i s s e l l e . N e p a s i m m e r g e r l e c o r d o n e t l a  
sure the Blade-locking Knob is properly engaged and tightened.  
N : L a l a m e e s t t r è s t r a n c h a n t e . M a n i p u l e r a v e c p r é c a u t i o n .  
9. Do not remove the White lubricant on the gears. The lubricant is  
used to reduce the friction and noise of the gears.  
7
 
®
Russell Hobbs RHFS1  
Food Slicer Features  
3
4
5
11  
10  
6
9
7
8
1
12  
2
13  
8
 
Features  
1. Base  
14. Pulse Switch  
2. Thickness Adjustment Knob  
3. Control Panel  
15. Safety Switch (0=Off, I=On)  
16. LCD Display  
4. Blade - Stainless Steel.  
(P/N 70710)  
5. Blade-locking Knob  
(P/N 70711)  
6. Power cord  
7. Protective Rail  
17. Weight Unit Button (g or oz)  
18. Weight Reset Button  
19 Thickness Reset Button  
20. Display On/Off Button  
21. Metric Electronic Scale  
Readout  
8. Feeder (P/N 70934)  
9. Feeder-locking Switch  
10. Food Press (P/N 70935)  
11. Adjustment Plate  
12. Food Tray (P/N 70936)  
13. Electronic Scale  
22. Digital Thickness Display  
23. Imperial Electronic Scale  
Readout  
24. Electronic Scale Overload  
Readout  
14  
15  
21  
22  
t r  
9 3 6 )  
m e n t s  
u p e r é g l a b l e  
c l e N º 7 0 9 3 5 )  
16  
17  
e r r  
l e N º 7 0 9 3 4 )  
23  
24  
N º 7 0 7 1 1 )  
v e r r  
7 1 0 )  
e r i n o x y d a b l e  
18  
19  
20  
c o m m a n d e s  
’ é p a i s s e u r d e  
p p a r  
e s  
9
 
Instructions for Use  
CONTROL PANEL  
1. Install the batteries as instructed in "Battery Installation and Battery  
Safety" on Page 5.  
2. The weight reading will change according to the weight on the  
Electronic Scale. It may include the weight of the provided Food  
Tray.  
3. To subtract the weight of the provided Food Tray or any food con-  
tainer in use, press the Weight Reset Button. The display will read  
"0g" or "0.00 oz".  
4. The thickness reading will change according to the position of the  
Adjustment Plate. Turn the Thickness Adjustment Knob to the  
desired thickness.  
5. To set the thickness display to "0", turn the Thickness Adjustment  
Knob counterclockwise to move the Adjustment Plate to the mini-  
mum thickness. Press the Thickness-Reset Button to set the display  
to "0".  
6. The thickness display may not show "0" when the adjustment plate  
is returned to minimum position because of the tolerance of the  
gears. Press the Thickness-Reset Button to read "0" again.  
7. The display on the Control Panel will automatically turn off after 15  
minutes of being idle, i.e., the weight or thickness has not been  
changed for 15 minutes.  
OPERATING THE FOOD SLICER  
CAUTION: Blade is sharp. Handle carefully.  
1. Place the Food Slicer on a hard, flat and level work surface. The  
Electronic Scale will not operate properly if the work surface is not  
level.  
Pulse  
Switch  
Safety  
Switch  
2. Plug the Food Slicer into a 120VAC, 60Hz,  
10A outlet.  
3. Before turning ON, ensure that the Blade is  
installed correctly and not touching any-  
thing.  
4. To turn on the appliance, first push the  
Safety Switch from position "O" to "I" then  
without releasing the Safety Switch, press  
down on the Pulse Switch. KEEP HANDS  
AWAY FROM BLADE! See Figure 3.  
Figure 3  
5. To turn off the appliance, release the Pulse switch. The Pulse Switch  
will spring up and the Safety Switch will return to the "O" position  
automatically. The Blade will stop in seconds.  
10  
 
u u n i n c e n d i e p o u v a n t e n t r a î n e r d e s b l e s s u r  
Instructions for Use (Cont.)  
e s é l e c t r i q u e s , c e q u i r i s q u e r a i t d e p r  
o u l i q u i d e s p o u r r a i e n t s e r é p a n d r  
6. Slide the Food Tray off the Electronic  
p a s d e s a l i m e n t s g é l a t i n e u x o u j u t e u x . L e s s u b s t a n c e s  
Scale. Invert the Food Tray and place on  
c n e g t e a l é p s p o a u r d e s o s .  
top of the Electronic Scale to collect the  
m s a u g r e r l a l a m e , n e v o u s  
food. Properly align the raised circles on  
N e n e u t r a l i s e z j a m a i s c e d i s p o s i t i f d e s é c u r i t é .  
the Scale with the recessed circles on  
n
the underside of the Food Tray. The  
u e r à t r a n c h e r  
curved end of the Food Tray should  
m e n t a s u f  
extend outward from the back of the  
n d a n t l a c o u p e . L o r s q u e l a  
scale. See Figure 4. The weight of the  
e x t r ê m e p r u d e n c e  
sliced food will be displayed on the con-  
trol panel. You can use other containers  
e p e r m e t p a s l ’ u t i l i s a t i o n d u  
to collect the sliced food, however, the  
a p i è c e  
Figure 4  
Electronic Scale may not operate prop-  
e n v o u s s e r v a n t d u c h a r i o t e t  
erly.  
u s b l e s s e r  
7. Set the desired cutting thickness by  
l a m e . V  
turning the Thickness Adjustment Knob.  
u n m o u v e m e n t d e v a e t v i e n t  
n t e n f a i s a n t c o u l i s s e r l e  
e e n p l a c e a v e thc el e thp ico ku ns es so si r of the slice. The setting  
e n t à t r a n c h e r s u r l e c h a r i o t e t  
Turning the Knob clockwise will increase  
will be displayed on the Control Panel.  
See Figure 5  
u e r l e c h a r i o t .  
r l e b o u t o n d e v e r r  
8. Slide the Feeder Locking Switch to the  
o m m a n d e s . V  
unlocked position.  
Figure 5  
e r é g l a g e s ’ a f  
9. Put the food on the feeder and push the  
p a i s s e u r d e s  
food with the Food Press Plate. Slice  
the food by sliding the Feeder back and  
forth across the Blade. See Figure 6. To  
avoid injury, always cut the food with  
Feeder and Food Press Plate. In case  
the food shape or size does not allow  
for the use of the Food Press, it can be  
removed. However, extra care should be  
e r é g l a g e d ’ é p a i s s e u r  
i s s e u r d e s t r a n c h e s e n f a i s a n t  
è r  
c e é l e c t r  
n c h é s , t o u t e f o i s , i l e s t p o s s i b l e  
c i p i e n t s p o u r r é c u p é r  
. V  
e r a a f  
n c h e s  
taken during cutting. Once the food is  
reduced in size, use the Food Press to  
continue slicing the remainder of the  
Figure 6  
r s l ’ e x t é r i e u r d e l a b a l a n c e .  
a u à a l i m e n t s d o i t  
e a u à a l i m e n t s . L  
food.  
IMPORTANT: The protective rail enforces the use of the Feeder at  
all times. Do not attempt to defeat this safety device.  
c l e s c e r  
r
10. Do not use the slicer to cut deep frozen food or bones. The Slicer  
a n c h e s . A l i g n e z  
may become overloaded and damage the Blade.  
o s e z - l e s u r l a b a l a n c e p o u r  
c o u l i s s e r  
11. Do not use the slicer to cut jellylike or wet food. The jelly or the  
i m e n t s d e l a b a l a n c e  
excessive juice may spread into the electrical components of the  
motor assembly. It may lead to fire and electric shock, personal  
injury or death.  
o i  
11  
 
User Maintenance Instructions  
®
This Russell Hobbs Food Slicer requires little maintenance. It contains no  
user-serviceable parts. Contact qualified appliance repair technician if the  
product requires servicing.  
CAUTION: Blade is sharp. Handle carefully. Do not wash in dish-  
washer. Do not immerse cord, plug or appliance in water or any  
other liquid. Do not remove the lubricant on the gears.  
Cleaning  
To keep your Food Slicer operating properly, clean after each use.  
1. Always unplug the appliance and let the Blade come to a complete  
stop before cleaning.  
2. Adjust the Thickness Adjustment Knob to the minimum thickness set-  
ting before cleaning.  
3. Remove the Food Press, Feeder, and Food Tray and wash in warm,  
soapy water. Rinse and dry thoroughly.  
4. Remove the Blade by inserting a coin in the slot of the Blade-locking  
Knob and turning clockwise. Remove the Blade-locking Knob. With  
one hand on the back side of the Blade, gently push the Blade for-  
ward and at the same time, grip the hole in the center of the Blade  
from the front and lift off. The Blade is very sharp, use extreme care  
when handling. DO NOT touch sharp edges  
5. Wipe all surfaces with a damp cloth making sure to thoroughly clean  
under the metal lip extending from the Control Panel. Dry completely  
with a soft cloth. Keep the Control Panel and Electronic Scale dry. DO  
NOT use harsh or abrasive cleansers or sharp metal objects to  
remove food as these could damage the coating on the exterior  
surface.  
6. Wash the Blade in warm, soapy water. Rinse and dry thoroughly. Do  
not allow the Blade to soak in water. Trying to locate the Blade under  
water is potentially dangerous.  
7. We suggest that you wash, rinse, dry and reinstall the Blade immedi-  
ately. Reinstall the Blade in reverse order of Step 4. Make sure the  
Blade-locking Knob is properly engaged and tightened. Replace the  
Feeder, Food Press and Food Tray. Slide the Feeder in front of the  
Blade and move the Feeder Locking Switch to the locked position.  
8. Do not remove the White lubricant on the gears and Motor Assembly.  
The lubricant is used to reduce the friction and noise of the gears.  
Removal of the lubricant will reduce the cutting performance and  
increase the operating noise. If the lubricant has been removed, a thin  
film of margarine or food-grade lubricant may be applied. Never apply  
industrial-use or automotive-use lubricants as they may not be safe for  
consumption and may damage the gears.  
9. Any servicing requiring disassembly other than the above cleaning  
must be performed by a qualified appliance repair technician.  
12  
 
Helpful Hints  
The Food Slicer can be used to cut meat, cheese, vegetables or  
bread.  
1. Roasts: Beef, pork, poultry and lamb -- Allow roasts to stand for  
20 minutes after removing from the oven before slicing.  
2. Bulk Bacon: With a sharp knife, remove the rind from "thoroughly  
chilled" bacon. Trim bacon to fit securely on Feeder, fat side down.  
3. Cheese and cold cuts: Slice as needed to retain flavor. Remove  
the plastic or hard casing from "well chilled" food before slicing.  
Use gentle pressure for uniform slices.  
4. When you are going to slice very thin food, unplug the unit and  
moisten the Blade with a damp cloth; this helps to prevent stick-  
ing. If cheese builds up on the Blade or under the Blade Cover,  
é e e t u n i f o r m e .  
unplug the slicer and wipe the Blade clean with a damp cloth.  
s s e z l e p a i n d é l i c a t e m e n t s u r l a l a m e e n e x e r ç a n t u n e  
5. When slicing food that is not uniform in size, always slice with the  
s d u e r m l e a n i è r  
largest side first.  
6. Vegetables and fruits: Slice potatoes, tomatoes, carrots,  
u b e r g i n e s , d e s c o u r g e t t e s e t d e s z u c c h i n i s .  
cucumbers, cabbage, lettuce, eggplant, squash and zucchini in a  
matter of minutes.  
s c a r  
s t p f r o u m i t s m : e s  
7. Breads: Do not use excessive pressure or squeeze the loaf. Trim  
l u s l a r g e .  
or cut bread to fit comfortably on the Feeder. Move the loaf of  
c h e z d e s a l i m e n t s d e f o r m e i r r é g u l i è r  
bread smoothly through the blade with continuous "gentle" pres-  
h l ’ a i f p p a r  
sure on the loaf.  
u m u l e s u r l a l a m e o u s o u s l e c o u v e r  
u t i o n e m p ê c h e r a l e s t r a n c h e s d e c o l l e r s u r l a l a m e . S i d u  
a m e a u p r é a l a b l e a v e c u n c h i f  
h s e z d é s i r  
h s e u r n i f o r m e s , n ’ e x e r  
l a p e a u o u l ’ e n v e l o p p e p l a s t i q u e d e s a l i m e n t s a v a n t  
a f i n d e p r é s e r v e r l a s a v e u r  
a r  
e n n e b i e n s u r l e c h a r i o t , g r a s v e r s l e b a s .  
v e z l a c o u e n n e . T  
e r :  
p e n d a n t 2 0 m i n u t e s à l a s o r t i e d u f o u r  
d o e u f d r e p a i n .  
e z u t i l i s e r v o t r  
i q u e s  
13  
 
LIMITED ONE YEAR WARRANTY  
®
Warranty: This Russell Hobbs product is warranted by Salton, Inc. to be free from defects in  
materials or workmanship for a period of (1) year from the original purchase date. This product  
warranty covers only the original consumer purchaser of the product.  
Warranty Coverage: This warranty is void if the product has been damaged by accident in ship-  
ment, unreasonable use, misuse, neglect, improper service, commercial use, repairs by unautho-  
rized personnel, normal wear and tear, improper assembly, installation or maintenance abuse or  
other causes not arising out of defects in materials or workmanship. This warranty is effective only  
if the product is purchased and operated in the USA, and does not extend to any units which have  
been used in violation of written instructions furnished with the product or to units which have  
been altered or modified or to damage to products or parts thereof which have had the serial num-  
ber removed, altered, defaced or rendered illegible.  
Implied Warranties: ANY IMPLIED WARRANTIES WHICH THE PURCHASER MAY HAVE ARE LIMIT-  
ED IN DURATION TO ONE (1) YEAR FROM THE DATE OF PURCHASE. Some states do not allow limi-  
tations on how long an implied warranty lasts, so the above limitation may not apply to you.  
Warranty Performance: During the above one-year warranty period, a product with a defect will  
be either repaired or replaced with a reconditioned comparable model (at our option) when the  
product is returned to the Repair Center, or the purchase price refunded. The repaired or replace-  
ment product will be in warranty for the balance of the one-year warranty period and an additional  
one-month period. No charge will be made for such repair or replacement.  
Service and Repair: Should the appliance malfunction, you should first call toll-free 1 (800) 233-  
9054 between the hours of 9:00 am and 5:00 pm Central Standard Time and ask for CONSUMER  
SERVICE stating that you are a consumer with a problem. Please refer to model number RHFS1  
when you call.  
In-Warranty Service (USA): For an appliance covered under the warranty period, no charge is  
made for service or postage. Call for return authorization (1 800 233-9054).  
Out-of Warranty Service: A flat rate charge by model is made for out-of-warranty service. Include  
$15.00 (U.S.) for return shipping and handling. We will notify you by mail of the amount of the  
charge for service and require you to pay in advance for the repair or replacement.  
For Products Purchased in the USA, but Used in Canada: You may return the product insured,  
packaged with sufficient protection, and postage and insurance prepaid to the USA address listed  
below. Please note that all customs duty / brokerage fees, if any, must be paid by you and we will  
require you to pay the cost of customs duty / brokerage fees to us in advance of our performing  
any service.  
Risk During Shipment: We cannot assume responsibility for loss or damage during incoming ship-  
ment. For your protection, carefully package the product for shipment and insure it with the carrier.  
Be sure to enclose the following items with your appliance: any accessories related to your prob-  
lem, your full return address and daytime phone number, a note describing the problem you experi-  
enced, a copy of your sales receipt or other proof of purchase to determine warranty status. C.O.D.  
shipments cannot be accepted.  
To return the appliance, ship to:  
To contact us, please write to, call, or email:  
Attn: Repair Center  
Salton, Inc.  
Salton, Inc.  
P.O. Box 7366  
708 South Missouri Street  
Macon, MO 63552  
Columbia, MO 65205-7366  
1 800 233-9054  
Limitation of Remedies: No representative or person is authorized to assume for Salton, Inc. any  
other liability in connection with the sale of our products. There shall be no claims for defects or  
failure of performance or product failure under any theory of tort, contract or commercial law  
including, but not limited to negligence, gross negligence, strict liability, breach of warranty and  
breach of contract. Repair, replacement or refund shall be the sole remedy of the purchaser under  
this warranty, and in no event shall Salton be liable for any incidental or consequential damages,  
losses or expenses. Some states do not allow the exclusion or limitation of incidental or conse-  
quential damages, so the above limitation or exclusion may not apply to you.  
Legal Rights: This warranty gives you specific legal rights, and you may also have other rights  
which vary from state to state.  
“© 2002 Salton, Inc.  
All Rights Reserved”  
P/N 61209  
Printed in China  
 

Radio Shack Automobile Accessories 63 235 User Guide
RBH Sound Speaker SI 744 User Guide
RCA Clock RC205 User Guide
Ricoh Printer Type 2500 User Guide
Roadmaster Automobile Accessories VRBT330W User Guide
Russell Hobbs Microwave Oven RHM2031 User Guide
Samsung All in One Printer SCX 5835FN User Guide
Samsung Digital Camera EC WB30FZBPBUS User Guide
Samsung Scuba Diving Equipment SM V700 User Guide
Sanitaire Carpet Cleaner SC6090 Series User Guide